Panasonic WV-SUD638, Руководство по эксплуатации

Страница: 76 / 212

Note
•
Panning, tilting and zooming operations can also be carried out on the [Image/Position] tab.
•
Adjusted zoom and focus position for the auto pan function will be applied when the [Set] button is
clicked.
Auto pan
[Dwell time]
Select a dwell time at the start point and the end point from the following.
0s/ 1s/ 2s/ 3s/ 4s/ 5s/ 10s/ 15s/ 20s/ 25s/ 30s
•
Default: 5s
[Speed]
Select a speed for the auto panning from the following.
1°/s, 2°/s, 3°/s, 4°/s, 5°/s, 7°/s, 10°/s, 13°/s, 18°/s, 24°/s
•
Default: 13°/s
IMPORTANT
•
When “Auto pan” is edited, it is necessary to click the [Set] button to apply them.
Note
•
Even when the selected zoom factor is higher than 45x, the camera will start panning with 45x zoom
factor.
[Endless panning]
The operations for panning can be set to the following
Off: Pan between the left and right end position points.
On(Clockwise): Pans clockwise.
On(Counterclockwise): Pans counterclockwise.
Default: Off
[Zoom] buttons, [Focus] buttons, [Brightness] buttons, Control pad/buttons and [Go] button
Refer to page 10 for descriptions of how to operate these buttons/pad.
[Close] button
Click this button to close the “Auto pan” setup menu.
8.5.5 Configure the settings relating to patrol (“Patrol” setup
menu)
Click the [Setup>>] button of “Patrol” on the [Image/Position] tab of the “Image/Audio” page (
®
page 58).
Here the information related to patrol is set.
76 Operating Instructions
8 Configure the settings relating to images and audio [Image/Audio]