Panasonic WV-SPW631L, Руководство по эксплуатации

Страница: 87 / 226

11 Configure the settings relating to images and
audio [Image/Audio]
The settings relating to JPEG and H.264 images such as the settings of image quality, audio, etc. can be
configured on this page.
The “Image/Audio” page has the [JPEG/H.264] tab, the [Image quality] tab, and the [Audio] tab.
11.1 Configure the settings relating to the image
capture mode [JPEG/H.264]
Click the [JPEG/H.264] tab on the “Image/Audio” page. (
®
page 41, page 43)
[Image capture mode]
Select an image capture mode from the following.
SPW631L SPW631L
:
2 mega pixel [16:9](30fps mode)/2 mega pixel [16:9](60fps mode)/2 mega pixel [4:3](30fps mode)/3 mega pixel
[4:3](30fps mode)*
*Used by super resolution techniques.
•
Default: 2 mega pixel [16:9](30fps mode)
SPW611L SPW611L
SPW611 SPW611
:
1.3 mega pixel [16:9](30fps mode)/1.3 mega pixel [16:9](60fps mode)/1.3 mega pixel [4:3](30fps mode)
•
Default: 1.3 mega pixel [16:9](30fps mode)
IMPORTANT
•
The positions of areas may move out of alignment when the “Image capture mode” setting is changed
when the following area settings are configured. Therefore we recommend that you configure each
area setting after configuring the “Image capture mode”.
–
mask area (
®
page 105)
–
privacy zone (
®
page 113)
–
VMD area (
®
page 134)
–
VIQS area (
®
page 115)
–
Cropping outlines (
®
page 145)
Note
•
When “On” is selected for “VIQS” and the setting value for the aspect ratio is changed from “4:3” to
“16:9”, make sure that the VIQS setting value does not exceed the maximum designated range.
Operating Instructions 87
11 Configure the settings relating to images and audio [Image/Audio]