16.2.1 Configure the settings related to sending E-mails
[E-mail notification]
Select “On” or “Off” to determine whether or not to provide notification by E-mail according to the settings for
the “Alarm” and “Diag.” checkboxes of “Destination of notification” below.
–
When an alarm is detected (“Alarm”)
–
When a notification of the remaining capacity of the SD memory card has been provided (“Diag.”)
–
When the SD memory card has become full (“Diag.”)
–
When the SD memory card cannot be recognized (“Diag.”)
•
Default:
Off
[Alarm image attachment]
Select “On” or “Off” to determine whether or not to attach an image to the E-mail to be sent when an alarm is
detected.
•
Default:
Off
[Image capture size]
Select the image capture size of images attached to an alarm E-mail from the following.
JPEG(1)/JPEG(2)/JPEG(3)
•
Default:
JPEG(2)
158
Operating Instructions
16 Configuring the network settings [Network]
Содержание WV-SPW631L
Страница 98: ...98 Operating Instructions 11 Configure the settings relating to images and audio Image Audio ...
Страница 184: ...8 Click Next 9 Click Finish 184 Operating Instructions 16 Configuring the network settings Network ...
Страница 209: ... When using a firewall including software allow access to all UDP ports Operating Instructions 209 19 Using the CD ROM ...