15.2.1 Configure the settings related to sending E-mails
[E-mail notification]
Select “On” or “Off” to determine whether or not to provide notification by E-mail according to the settings for
the “Alarm” and “Diag.” checkboxes of “Destination of notification” below.
–
When an alarm is detected (“Alarm”)
–
When a notification of the remaining capacity of the SD memory card has been provided (“Diag.”)
–
When the SD memory card has become full (“Diag.”)
–
When the SD memory card cannot be recognized (“Diag.”)
•
Default:
Off
[Alarm image attachment]
Select “On” or “Off” to determine whether or not to attach an image to the E-mail to be sent when an alarm is
detected.
•
Default:
Off
Note
•
When “Quad stream” is selected for “Image capture mode”, images cannot be attached.
•
When “On(NTSC)” or “On(PAL)” is selected for “Monitor out”, images cannot be attached.
164
Operating Instructions
15 Configuring the network settings [Network]
Содержание WV-SFV481
Страница 36: ...36 Operating Instructions 2 Monitor images on a cellular phone mobile terminal...
Страница 190: ...8 Click Next 9 Click Finish 190 Operating Instructions 15 Configuring the network settings Network...
Страница 216: ...When using a firewall including software allow access to all UDP ports 216 Operating Instructions 18 Using the CD ROM...