Panasonic WV-SFV310A, Руководство по эксплуатации

Страница: 99 / 222

IMPORTANT
•
The mask area may move out of alignment when the JPEG/H.264 “Image capture mode” setting is
changed. Make sure to check the mask area after changing the “Image capture mode” setting.
•
The mask area may move out of alignment when “Extra optical zoom” is configured. Make sure to
check the mask area after configuring “Extra optical zoom”.
Note
•
When the [Reset] button is clicked, masking for all the masked areas will be canceled.
11.5 Configure the focus setting (“Focus” setup
menu)
SFx311 SFx310 SPW311L SPW312L SPW531L SPW532L
Click the [Setup>>] button of “Focus” on the [Image quality] tab of the “Image/Audio” page.
Adjust the focus setting by moving the lens focus to the appropriate position.
Manual and auto adjustments are available.
The auto focus function also allows users to correct out of focus when changing between color and black &
white images.
Focus
Auto focus
[Auto focus]
The auto focus function starts to automatically adjust focus based on a subject located in the center of the
screen by clicking the [Execute] button.
IMPORTANT
•
When a value with an interval longer than “Max.1/30s” (Max.2/30s/ Max.4/30s/ Max.6/30s/ Max.
10/30s/ Max.16/30s) is selected for “Maximum shutter” (
®
page 92), if “Auto focus” is executed during
slow shutter operations at night, it may take a long time to complete “Auto focus”.
•
In the following locations or with the following subjects, the focus may not be able to be automatically
adjusted. In this case, manually adjust the focus.
–
when the subject moves a lot
–
when there are large changes to the lighting intensity
–
when the light level is low
–
when the subject or location is extremely bright or reflective
–
when viewing through windows
–
when the dome cover is in a locations where it can easily become dirty
Operating Instructions 99
11 Configure the settings relating to images and audio [Image/Audio]