The alteration detection settings will be configured in the following procedure.
Generation of the CRT key (encryption key)
Configuration of the additional info for detecting alteration
Application for the approval by CA
(Certi-ficate Authority) - Issue of the certifi-cate
Generation of CSR (Certificate Signing Request)
Installation of the certi-ficate
Generation of the self-signed certificate
When using the certi-ficate issued by CA
When using the self-signed certificate
10.5.1 Generation of the CRT key (encryption key)
IMPORTANT
•
When the self-signed certificate or certificate (security certificate) issued by CA is valid, it is impossible
to generate the CRT key.
•
When the certificate (security certificate) issued by CA is used, the available key size varies depending
on the CA. Check the available key size in advance.
•
To generate the CRT key, it may take about 2 minutes. Do not operate the web browser until the
generation of CRT key is complete. While the CRT key is being generated, the refresh interval and line
speed may be lower.
1.
Click the [Execute] button of “CRT key generate”.
→
The “CRT key generate” dialog box will be displayed.
Operating Instructions
65
10 Configure the basic settings of the camera [Basic]
Содержание WV-SFV310A
Страница 7: ...22 Directory structure of drive B 221 Operating Instructions 7 Table of Contents...
Страница 88: ...88 Operating Instructions 11 Configure the settings relating to images and audio Image Audio...
Страница 177: ...8 Click Next 9 Click Finish Operating Instructions 177 16 Configuring the network settings Network...
Страница 205: ...When using a firewall including software allow access to all UDP ports Operating Instructions 205 19 Using the CD ROM...