background image

7   Playback of images on the SD memory card

When clicking a time and date listed on the log list window, the “Live” page will turn to the “Playback” page.
When images associated with the clicked time and date are on the SD memory card, the first image of them
will be displayed.
The display format varies depending on the “Recording format” of the SD memory card.

IMPORTANT

Refresh interval of images may become slow during playback or download.

When many images are saved on the SD memory card, it may take time to display images on the
“Playback” page.

Images will be displayed in VGA size on the “Playback” page regardless of the image capture size of
the images saved on the SD memory card. When the aspect ratio is “16:9”, images will be displayed
in “640x360” on the “Playback” page regardless of the image capture size of the images saved on the
SD memory card. Therefore, images may look coarse on the “Playback” page.

When playing images by selecting an FTP error log on the log list, images may not be played in order
of images recorded on the SD memory card if they have been recorded on the SD memory card with
selected value for the “Transmission interval” setting of “FTP periodic image transmission” on the
[Advanced] tab is “1min” or less.

The playback refresh interval may become slower when recording data to the SD memory card.

7.1  Playback “JPEG(1)”/“JPEG(2)”/“JPEG(3)”
images saved to the SD memory card

A

Number of images
When clicking a time and date listed on the log list window, total number of images associated with the
clicked time and date, and the number of the currently displayed image will be displayed.

Note

Enter the desired number of image and press the [Enter] key on the keyboard. The image of the
designated number will be displayed.

[REW] button

Each time the button is clicked, the playback speed will change.

Operating Instructions

35

7 Playback of images on the SD memory card

Содержание WV-SFV310A































































































































































































































Отзывы: