Panasonic WV-SFN480PJ, Руководство по эксплуатации

Страница: 70 / 220

10.3 Configure the settings relating to the SD
memory card [SD memory card]
Click the [SD memory card] tab on the “Basic” page. (
®
page 56, page 58)
The settings relating to the SD memory card can be configured on this page.
Operating mode
[SD memory card]
Select “Use” or “Not use” to determine whether or not to use the SD memory card.
•
Default: Use
IMPORTANT
•
Select “Not use” when operating without an SD memory card.
•
Before removing the SD memory card from the camera, it is necessary to select “Not use” first. When
removing SD memory cards, make sure that the green indicator turns off when the SD ON/OFF button
is pressed and held down (about 2 seconds). The recorded data may become corrupted if the SD
memory card is removed when the SD MOUNT indicator is lit in green.
•
When an SD memory card is replaced after pressing and holding the SD ON/OFF button for about 2
seconds, press the SD ON/OFF button for about 1 second and confirm that the SD MOUNT indicator
is lit in green. If the SD ON/OFF button is not pressed, the SD MOUNT indicator lights in green for
about 5 minutes after replacing the SD memory card.
•
When an SD memory card is inserted when “Use” is selected, data will be saved in accordance with
the setting of “Save trigger”.
•
After inserting the SD memory card, it is necessary to select “Use” to use the SD memory card.
70 Operating Instructions
10 Configure the basic settings of the camera [Basic]