Panasonic WV-SFN110 Скачать руководство пользователя

Страница: 10 / 208

1.2 About the “Live” page

②

①

③

⑤

④

⑥

⑧

⑨

⑩

⑦

⑪

⑫

⑬

⑭

⑯ ⑰

⑮

⑱ ⑲

⑳

[select language] pull-down-menu

The camera’s display language can be selected. The default language can be set in the [Language] in the
[Basic] settings. (

page 44)

[Setup] button

Displays the setup menu. The button will turn green and the setup menu will be displayed.

[Live] button

Display the “Live” page. The button will turn green and the “Live” page will be displayed.

[Compression] buttons

•

[H.264] button:

The letters “H.264” on the button will turn green and an H.264 image will be displayed.

When “On” is selected for “H.264 transmission” of “H.264(1)”, “H.264(2)”, “H.264(3)”, “H.264(4)”, the
[H.264] button will be displayed. (

page 75)

•

[JPEG] button:

The letters “JPEG” on the button will turn green and JPEG image will be displayed.

[Stream] buttons

These buttons will be displayed only when an H.264 image is displayed.

•

[1] button:

The letter “1” will turn green and images in the main area will be displayed in accordance

with the setting of “H.264(1)”. (

page 75)

•

[2] button:

The letter “2” will turn green and images in the main area will be displayed in accordance

with the setting of “H.264(2)”. (

page 75)

•

[3] button:

The letter “3” will turn green and images in the main area will be displayed in accordance

with the setting of “H.264(3)”. (

page 75)

•

[4] button:

The letter “4” will turn green and images in the main area will be displayed in accordance

with the setting of “H.264(4)”. (

page 75)

[Image capture size] buttons

These buttons will be displayed only when a JPEG image is displayed.

Operating Instructions

1 Monitor images on a PC

Содержание WV-SFN110

















































































































































































































Результаты поиска

Содержание WV-SFN110

Отзывы:

Похожие инструкции для WV-SFN110

Бренды по названию

Популярные бренды

Panasonic WV-SFN110, Руководство по эксплуатации

Результаты поиска

Содержание WV-SFN110

Отзывы:

Похожие инструкции для WV-SFN110

Бренды по названию

Популярные бренды