Configure the network settings
Configuring the camera so that it can be accessed from a PC
The following are descriptions for when the camera with default settings is configured. If you are using firewall
software on your PC, the Setup Program may not be able to find any cameras on your network. Configure the
setting of the camera after temporarily invalidating the firewall software. Contact the network administrator or your
Internet service provider for information about configuring the settings of the network.
z
Insert the provided CD-ROM into the CD-ROM drive of your PC.
• The License Agreement will be displayed. Read the Agreement and choose “I accept the term in the license
agreement”, and click [OK].
• The launcher window will be displayed. If the launcher window is not displayed, double click the “CDLauncher.
exe” file on the CD-ROM.
Note:
•
Refer to “Using the CD-ROM” in the Operating Instructions on the provided CD-ROM for further information about
CDLauncher.
x
Click the [Run] button next to [IP Setting Software].
[Panasonic IP Setting] screen will be displayed. Click the [Network Settings] button after selecting the MAC address/IP
address of the camera to be configured.
c
Select the camera you want to configure, and click [Access Camera].
Note:
•
When cameras are displayed in [Panasonic IP Setting] screen, click the camera with same MAC address as the
MAC address printed on the camera that you want to configure.
26
