background image

Main functions

H.264 dual stream and JPEG (MJPEG) triple encoding

H.264 dual stream output and JPEG (MJPEG) output can be simultaneously provided.
* H.264 stream1:  1920x1080/ max. 30 fps 

SC588A

 

1280x720/ max. 30 fps 

SC387A

H.264 stream2: 640x360/ max. 30 fps

Super Dynamic (MEGA Super Dynamic)

(

 Operating Instructions (included in the CD-ROM))

MEGA Super Dynamic compensates brightness on a pixel-to-pixel basis so that it produces clearer images even if objects 
have various illumination intensities. 

Day & Night function 

Images will be displayed clear even at night since the camera will be automatically switched from the color mode to the 
black and white mode under low illumination condition.

30x optical zoom and high accuracy preset position function

A single camera provides wide area monitoring.
In 1280x720 mode up to 45x HD Extra Optical Zoom is possible. 

SC387A

In 640x360 mode up to 90x Extra Optical Zoom is possible. 

SC588A

The camera can be installed not only on the ceiling but also on the wall

When using an optional mount bracket, embedded installation on a ceiling or mounting on a wall is available.

Power over Ethernet function

When connecting with an IEEE802.3af compliant PoE (Power over Ethernet) device, power will be supplied by simply con-
necting a LAN cable. 

SDXC/SDHC/SD memory card slot equipped

It is possible to save H.264 videos and JPEG images on the SDXC/SDHC/SD memory card manually at an alarm occur-
rence, during the period of the schedule, or from a web browser. It is also possible to save JPEG images at a network fail-
ure occurrence (download is possible).
(Recommended SDXC/SDHC/SD memory cards 

 page 33)

Auto tracking function with smooth changing between panning, tilting and zoom

It is possible to perform smooth changing between panning, tilting and zoom.
*  The accuracy with the auto tracking function depends on the installation location. Make sure that the installation location 

is appropriate in advance.

About the user manuals

There are 2 sets of operating instructions for the WV-SC588A or WV-SC387A as follows. 

  •  Installation Guide: Explains how to install and connect devices, as well as how to connect and configure the network. 
  •  Operating Instructions (included in the CD-ROM): Explains how to perform the settings and how to operate this camera. 

Adobe

®

 Reader

®

 is required to read these operating instructions on the provided CD-ROM.

When the Adobe Reader is not installed on the PC, download the latest Adobe Reader from the Adobe web site and install it.

The external appearance and other parts shown in this manual may differ from the actual product within the scope that will 
not interfere with normal use due to improvement of the product.

English screens are used in these operating instructions.
    

6

Содержание WV-SC387A









































Отзывы: