39
17. Add TLS settings to HTTPS
(Operating Instructions – Configuring the network settings [Network] – Configure advanced
network settings [Advanced] – Configure the HTTPS settings)
Add TLS1.1, TLS1.2 and TLS1.3 selection items to the HTTPS connection method.
[HTTPS - Connection]
Select the protocol used to connect the camera.
•
HTTP:
HTTP and HTTPS connections are available.
•
HTTPS:
Only the HTTPS connection is available.
•
Default:
HTTP
Select the TLS to use when HTTPS is selected.
•
TLS1.1
: Enable/Disable.
•
TLS1.2
,
TLS1.3
: Always enabled and cannot be disabled.
•
Default: TLS1.1
: Disable
、
TLS1.2
: Enable,
TLS1.3
: Enable
Note
• To change to an HTTPS connection when HTTP is selected, perform HTTPS connection settings first.
The HTTPS connection will be available even if the setting is changed to HTTP afterwards.
