36
14. Using the recording function is changed when the Ext. software
mode is On
(Operating Instructions – Configure the basic settings of the camera [Basic]) – Configure the
settings relating to the SD memory card [SD memory card])
Even if the Ext. software mode is set to On, the recording function to SD memory card by this product
function can be used.
[Ext. software mode]
Set this setting to “On” when the installed Ext. software uses the SD memory card of this product.
•
On:
The Ext. software can use the SD memory card of this product.
•
Off:
The Ext. software cannot use the SD memory card of this product.
Default:
Off
Note
･
For information about the software, refer to our support website
https://i-pro.com/global/en/surveillance/training-support/support/technical-information
<Control No.: C0103>.
･
When the Ext. software mode is set from On to Off, it is recommended to format the SD memory card.
･
When operating the Ext. software that uses an SD memory card, the operation of the recording
function to the SD memory card cannot be guaranteed.
