background image

Specifications

Ambient temperature:

–10 °C- + 50 °C {14 °F - 122 °F}

Dimensions:

185 mm {7-5/16"} in diameter x 145 mm {6-7/16"} in height 

Weight:

Approx. 800 

g

{1.77 lbs.}

Finish: 

Main body: Treatment steel
Decorative cover: ABS resin with silver metallic coating
Dome cover: Acrylic resin

Standard Accessories

Operating Instructions (this book) ............................. 1 pc.

The following are for installation
Safety wire  ................................................................. 1 pc.
Safety wire angle  ....................................................... 1 pc.
Template A  ................................................................ 1 sheet
Template B  ................................................................ 1 sheet
Inner shell  .................................................................. 1 pc.

For U.S. and Canadian fields:

Panasonic System Networks Company 
of America,
Unit of Panasonic Corporation 
of North America

www.panasonic.com/business/
For customer support, call 1.800.528.6747
Three Panasonic Way, Secaucus, 
New Jersey 07094 U.S.A.

Panasonic Canada Inc.

5770 Ambler Drive, Mississauga, 
Ontario, L4W 2T3 Canada 
(905)624-5010
www.panasonic.ca

© Panasonic System Networks Co., Ltd. 2010

NM0806-4010       3TR004559EAA       Printed in Japan

For European and other fields:

http://panasonic.net

Importer's name and address to follow EU rules:

Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg F.R.Germany

Содержание WV-Q151CE













Отзывы: