Panasonic WV-CU980, Руководство по эксплуатации

Страница: 27 / 48

27
The procedure for changing the network settings is given below.
Important:
• When exiting after changing the network settings, the equipment reboots after displaying the message "Auto Restart" for a
few seconds, and the login screen is displayed.
Selection of the item to be set
Operation procedure
1
From the settings menu, select “003 Network
Setup” (
☞
Page 22 Steps 1 to 2)
2
Press
The screen for setting the IP address of this equipment is
displayed.
3
Press or , and select the item to be
changed
Each time or is pressed, the screens for - setting
the IP address of this equipment, setting of the subnet
mask, setting the default gateway, setting the IP address of
the destination of connection, setting the communication
mode with the destination of connection, and setting the key
for communication with the destination of communication
are displayed successively in that sequence.
4
Press
The execution screen of the menu function is displayed.
When the logged-in user is not an administrator, before the
execution screen of the menu function is displayed (Step 2),
it is necessary to input the administrator ID and password in
that sequence.
For details of the method of inputting, refer to “Method of
Using the Settings Menus” (
☞
Page 22).
Main unit settings
(continued)
Network settings
Common operation of IP address, subnet mask, and default gateway
Numerical input
The blinking portion can be changed.
Adjust the cursor to the numeral to be changed, and the
numeral is changed when an input is made using the
numeric buttons.
The cursor can be moved to the left or right using or
.
Input a value from 0 to 255 in nnn.
The numerical values can be increased or decreased using
the keys.
Error messages
When a wrong numerical value (other than 0 to 255) is input,
the message “Out Of Range” is displayed, and the display
returns to the immediately previous setting screen. Input
again the correct numerical value (0 to 255).