Panasonic WV-CU980, Руководство по эксплуатации

Страница: 15 / 48

15
Before Operation
(continued)
Switching ON the Power
Switching OFF the Power
Flow of Basic Operations
1
Insert the power supply plug of the AC adapter into
a 100V AC 50Hz / 60Hz power socket
→
The [Operation] indicator lights up, the software version
and the login awaiting screen are displayed successively
on the display.
2
When using the main unit for the first time, or when
“All Reset” is carried out, the initial registration
start screen is displayed after the software version
is displayed
Carry out “Initial registration” of “First-time Setup”.
(
☞
Page 16)
1
Log out
For the method of operation, see “Logging out” of “First-time
Setup” (
☞
Page 18)
2
Remove the power supply plug from the power
supply socket
→
When the power supply goes OFF, the [Operation]
indicator goes OFF.
First-time Setup
This is the setting required after the settings of the main unit
are reset to the initial state when using the main unit for the
first time, or when “All Reset” (
☞
Page 43) is carried out.
Normal operation
These are the operations for normal operation of this
equipment.
Software version display
(for a few seconds)
Login awaiting screen
Switch ON the power.
Initial registration
Login (administrator)
Main unit settings for operation
Normal operation after login
First-time Setup Normal operation
Switch ON the power.
Login
Logout
Switch OFF the power
Operation
Changing the main
unit settings