Panasonic WV-ASC970E Скачать руководство пользователя страница 54

Страница: 54 / 79

Menu Function Details

■

Camera Setup

Note:

• The following function requires the use of cameras

supporting this function.

• The details on the setup menu differ depending on

camera models. Refer to WV-CU950/650
Operating Instructions and the Operating
Instructions of camera for available controls on the
camera setup menu.

1. Select a desired monitor. (Refer to p. 39 Monitor

Selection.)

2. Display "CamMenu" menu. (Refer to Step 1 and 2

of p. 53 To Recall Menu Functions.)

3. Select a desired function by pressing one of the F1

to F4 buttons.

Available buttons and functions
F1: On

Opens the setup menu of selected camera.

F2: Off

Closes the setup menu of selected camera.

F3: Rst

• Displays the special menu.

• To restore the default camera position, move

the cursor to REFRESH on the camera setup
menu by moving the 3D joystick. Then, press
this button.

F4: A.Rst

To reset all the camera settings to the factory

default, move the cursor to CAMERA RESET on
the camera setup menu by moving the 3D joystick.
Then, press this button.

Note:

• Depending on the camera model, "CAMERA

RESET" is not displayed on the camera setup
menu. In this case, the F4 button is unavailable.

• This function is available in only for WJ-SX650

WJ-SX850.

CamMenu: 001

Off Rst A.Rst

■

Auto Mode

1. Select a desired monitor and camera. (Refer to

p. 39 Monitor Selection and Camera Selection.)

2. Display "Auto Mod" menu. (Refer to Step 1 and 2

of p. 53 To Recall Menu Functions.)

3. Select a desired function by pressing one of the F1

to F4 buttons.

Available buttons and functions
F1: Seq

Activates the sequence mode.

F2: Sort

Activates the sort mode.

F3: Pan

Activates the auto pan mode.

F4: Patrol

Activates the patrol mode.

■

BW Mode

1. Select a desired monitor and camera. (Refer to

p. 39 Monitor Selection and Camera Selection.)

2. Display "BW Mode" menu. (Refer to Step 1 and 2

of p. 53 To Recall Menu Functions.)

3. Select a desired function by pressing one of the F1

to F4 buttons.

Available buttons and functions
F1: On

Changes the camera image from color (colour) to

black and white.

F2: Off

Changes the camera image from black and white

to color (colour).

AutoMod: 002

Seq Sort Pan Patrol

BW Mode: 003

On Off Auto1 Auto2

Содержание WV-ASC970E
















































































Результаты поиска

Содержание WV-ASC970E

Отзывы:

Похожие инструкции для WV-ASC970E

Бренды по названию

Популярные бренды

Panasonic WV-ASC970E, Руководство по эксплуатации

Результаты поиска

Содержание WV-ASC970E

Отзывы:

Похожие инструкции для WV-ASC970E

Бренды по названию

Популярные бренды