Computer Interfacing
23
Using
The USB and TWAIN driver and Panaboard Software
are installed in your computer by following
procedures.
Note
•
Do not yet connect a USB cable to the unit.
1
Power on your computer and start Windows*
1
.
•
Log on as an administrator for
Windows 2000
or Windows XP.
*
1
Microsoft
®
Windows
®
operating system
(hereafter Windows)
2
Insert the CD-ROM into the CD-ROM drive.
The Setup window appears automatically.
•
Depending on the operating system or the
settings that you are using, the Setup
window may not appear automatically.
In such a case, execute “Menu.exe” in the
CD-ROM from “My Computer”.
3
When “
Welcome
” window appears, click
[Next]
.
4
Click
[Panaboard Setup]
.
•
To install Panasonic-DMS, click
[Panasonic-
DMS]
(see page 25).
•
To read the operating instructions in the
provided CD-ROM, the Adobe Reader or
Acrobat Reader must be installed in your
computer. It can be downloaded from the
Adobe's Web site if Internet is available.
5
Click
[Install Software]
.
6
Read “END-USER LICENSE AGREEMENT”
carefully and click
[Yes]
.
7
When the following window appears, check
that the unit is not connected to your computer
and click
[OK]
.
•
If the USB cable is connected to the unit,
remove it and click
[OK]
.
Installing Drivers / Panaboard
Software
