Panasonic Workio DP-C405, Руководство по эксплуатации

Страница: 34 / 100

34
Chapter 1 Basic Menu Features
Storing a Job in Memory
A copy job can be registered as a preset job. It is useful to register the frequently used settings as
Preset Jobs.
z Refer to Recalling a Preset Job Stored in Memory (see page 35).
z Once registered, the copy job settings are kept in the job memory until they are overwritten by new settings.
z A Proof Copy job cannot be registered in the job memory.
z “ M1: ”/“ M2: ” cannot be registered when the Manual Skyshot mode is selected. Refer to Copier Settings in the
Operating Instructions (For Function Parameters) of provided CD-ROM.
1
Place original(s).
z Refer to Placing Originals (Copy) in the
Operating Instructions (For Basic
Operations) of provided booklet.
2
Press the Copy key if the machine is
set to other function mode.
3
Select the copy features (see pages 8
to 33 and 40 to 91).
4
Enter the desired number of copies.
5
Select “ Preset Jobs ”.
6
Select “ Save ”, and then select a job
button without a job registered.
z The job button, in which a job has been
registered, has a job name.
7
Enter a job name, and then select
“
OK ”.
z Up to 20 characters can be entered.
z
For instructions on how to enter characters,
refer to
Using the Keyboard in the
Operating Instructions (For Function
Parameters) of provided CD-ROM.
z After completing the editing of the job name, press
the
Reset key to return to the initial screen of the
currently active mode.