Panasonic Workio DP-C305, Руководство по эксплуатации

Страница: 38 / 112

Cop
ying
38
Others
Double Exposure
NOTE
Select “ Preset Jobs ”.
3
Select the Double Exposure copy mode when copying a 2-sided original that is smaller than 5.5" x 8.5" in size onto
a standard size media ( Ex: Letter size). One side (Front) of the original is copied at the top of the page and the other
side (Back) is copied at the bottom on the copied media as illustrated below.
●
If the following situation should arise while you are copying an original with the ADF open, close the ADF and
continue copying.
- When a bright light shines on the Platen Glass, the position of the original may not be detected correctly.
- If there are less than 5 mm of white margin on originals, the edge of the copied paper may get blurred in white.
Ex: Name card (printed on both side)
Original Size:
(less than 5.5" x 8.5") Copy Size:
(Letter)
Front Side Image
Back Side Image
ABC
ABC
DEF
Place original on the Platen Glass.
(This feature is not available when using
the ADF.)
1
●
Leave the ADF open while making copies.
Press the Copy key if the machine is
set to other function mode.
2
Select “ M10:Double Exposure ”.
4
●
If the Confirmation screen “Ready for M10
Memory Copy” is displayed, select “
Close ”.
●
When selecting “ M10:Double Exposure ”,
the previous settings will be cleared.
Select other settings (
Ex: “ Sort ” copy) after
selecting “ M10:Double Exposure ”.
Face down.
Align with top left corner.