Panasonic Workio DP-C305, Руководство по эксплуатации

Страница: 62 / 112

P
rob
lem Solving
62
Troubleshooting
Check Action
Unit Does Not Operate
Check if the Power Switches (Main Power
Switch on the rear and Power Switch on the
left side of the machine) are turned ON and if
the power cord is plugged into the AC outlet.
Is the display dark?
Press the Energy Saver key on the Control
Panel.
Does the Energy Saver key flash (or light),
and is the display turned OFF?
(See page 15)
Perform operations in accordance with each
message. (See page 64)
Do any of the U## code and messages
appear on the display?
(U1, U4, U6, U7, U11....etc.)
Add staples. (See pages 84 to 88)
Remove all jammed staples.
(See pages 84 and 86)
Do the Add Staples Indicator and message
appear on the display?
Add papers. (See pages 76 to 77)
Do the Add Paper Indicator and message
appear on the display? (
)
Remove the misfed paper. (See pages 66 to 75)
Do the Paper Misfeed Indicator and
message appear on the display? (J##)
Turn OFF the Power Switch on the left side
and the Main Power Switch on the rear of the
machine, and then turn them back ON. If the
error code has not been cleared, call the
authorized Panasonic dealer.
Do E#-## Indicator and message appear on
the display?
Turn OFF the Power Switch on the left side
and the Main Power Switch on the rear of the
machine, and then turn them back ON. If the
machine still does not accept the next job, call
the authorized Panasonic dealer.
The machine does not accept the next job
during operation, instructed job would not be
accepted for a long time period, or job would
not be completed.
Light Copies
Select “ Darker ”.
Does the Exposure Indicator display
“
Lighter ”?
Replace the Toner Cartridge.
(See pages 78 to 79) Do the Add Toner Indicator and message
appear on the display? (
)
■
If the measures outlined above do not solve the problem, call the authorized Panasonic dealer.
Remove the paper from inner tray.
(For the capacity of Inner Tray, see page 94) Does the error message “Remove paper
from inner tray” appear on the display?