Panasonic WORKIO DP-C213, Руководство по эксплуатации

Страница: 62 / 112

Pr
ob
lem Solving
62
Troubleshooting
Check Action
Unit Does Not Operate
Check if the Power Switches (Main Power
Switch on the Rear and Power Switch on the
Left Side of the machine) are turned ON and if
the power cord is plugged into the AC outlet.
Does the display dark?
Press Energy Saver key on the Control Panel.
Does the Energy Saver key flash (or light),
and is the display turned OFF?
(See page 15)
Perform actions in accordance with each
message. (See page 64)
Does any of the U## code and messages
appear on the display?
(U1, U4, U6, U7, U11....etc.)
Add staples. (See pages 84-88)
Remove all jammed staples.
(See pages 84-86)
Does the Add Staples indicator and message
appear on the display?
Add paper. (See pages 76 and 77)
Does the Add Paper indicator and message
appear on the display? (
)
Remove the misfed paper. (See pages 66-75)
Does the paper misfeed indicator and
message appear on the display? (J##)
Turn the Power Switch on the Left Side and
the Main Power Switch on the Rear of the
machine to OFF, and back ON. If the error
code does not clear, call the authorized
Panasonic dealer.
Does E#-## indicator and message appear
on the display?
Turn the Power Switch on the Left Side and
the Main Power Switch on the Rear of the
machine to OFF, and back ON. If the machine
still does not accept the next job, call the
authorized Panasonic dealer.
The machine would not accept the next job
during operation, instructed job would not be
accepted for a long time period, or job would
not be completed.
Light Copies
Select " Darker ".
Does the exposure indicator display
"
Lighter "?
Replace the Toner Cartridge.
(See pages 78 and 79) Does the Add Toner indicator and message
appear on the display? (
)
■
If the measures outlined above do not solve the problem, call the authorized Panasonic dealer.
Remove the paper from inner tray.
(For the capacity of Inner Tray, see page 94) Does the error message "Remove paper from
inner tray" appear on the display?
006Basic_OP(UK)062_065.pmd 16/11/2006, 13:07 62