CAUTION:
These servicing instructions are for use by qual-
ified service personnel only. To reduce the risk of elec-
tric shock do not perform any servicing other than that
contained in the operating instructions unless you are
qualified to do so.
• Do not attempt to disassemble the apparatus.
To prevent electric shock, do not remove screws or
covers.
There are no user-serviceable parts inside. Contact
qualified service personnel for maintenance.
Video Output Board
Operating Instructions
Model No.
WJ-PB65M16
Video Output Board 1 Only
ALAR
M OU
T 1
ALARM
OUT 2
OUT -3
MON
ITOR
OUT
TERM.ON
ON
MODE
TERM.OFF
MODE
DATA 4
HDR4/TMNL8
HDR2/TMNL4
DATA 3
HDR3/TMNL7
HDR1/TMNL3
DATA 2
TMNL6
TMNL2
DATA 1
TMNL5
TMNL1
/PS D
ATA
Video Output Board 2
Video Output Board 1
DATA
DATA
MODE
MODE
MODE
TERM
OUT X
-3
EXTE
NSIO
N
ON
1
2
3
4
OFF
OUT
IN
OUT X-1
Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.
PRECAUTIONS
Along with this document, refer to Matrix Switcher WJ-
SX650 Series Operating Instructions for major operating
REFERENCES
• Do not strike or give a strong shock to the unit.
It may cause damage or allow water to enter the unit.
• Pay attention to static electricity
Make certain to keep boards inside the anti-static sack
until it is installed.
Put your hand on a metallic surface, other than the
boards to discharge static electricity before installation.
Do not touch components mounted on the boards
directly by hand.
Hold only both edges of the boards when installing.
controls and their functions, switch settings, and board
mounting procedure.
PREFACE
Video Output Board WJ-PB65M16 is designed for monitor
output channel expansion of Matrix Switcher WJ-SX650
Series.
Important:
• The software versions of Video Output Board 1 and 2
must be the same.
FEATURES
• With a set of this board, up to 16 monitors can be
added.
• Up to 32 alarm output signals can be supplied to exter-
nal devices connected to the ALARM OUT 1 and 2 ports.
If the software version of each board is different,
upgrade the lower version to the higher one. (Refer to
WJ-SX650 Series Operating Instructions for how to
check the software version.)
• Refer to the dealer for the version-up procedure. (Surely
follow the instructions and notes.)