Panasonic VoiceSonic VB-9411AD, Операция, установка и программирование

Страница: 13 / 158

O-11
Making an Exchange Line Call
Making an Exchange Line Call
( )
Account
code
( )
Telephone
No.
( )
Account
code
( )
Busy Tone
Making a Call
Using the LINE Key .........................................................................
You can make an exchange line call by pressing the LINE key and dialing a telephone number. You need
not dial a group number.
LINE
1 3
4 6 5
2
0
7 9 8
Telephone
Number
Pulse to DTMF Signal Conversion
You can send DTMF signals by pressing or # after dialing a telephone number. This feature is useful for calling bank
computers.
By programming, the system automatically sends DTMF signals after dialing a telephone number.
Long Speech Alarm
The alarm beeps after you have been speaking for 2 min. and 30 sec. Afterwards, it beeps every 3 min.
This feature requires programming and only available for key telephones.
Account Code
This system can record a separate account code for each client. Each account code can be up to 10 digits long. If you
want to enter an account code and make a call, do the following:
8 7
1 3
4 6 5
2
0
7 9 8
LINE
1 3
4 6 5
2
0
7 9 8
If you want to enter an account code during the conversation, do the following:
MEMORY
1 3
4
6 5
2
0
7 9 8
Trunk Queuing
When all exchange lines are busy, use this feature to tell you when a line becomes free.
LINE
6
When your telephone rings, pick up the handset within 16 sec. You are immediately connected to a vacant line.
1 4 3 2