4.3.2 Assembling lobby station modules
The lobby station is composed of a combination of
modules according to the number of rooms connected
to.
– See page 6 for information on the composition of
each module.
– See page 10 for information on the items included
with each module.
Example: lobby station for camera module
´
1 pcs. +
button module
´
3 pcs. + blank panel
´
1 pcs.
1
Attach each module (
B
) to the frame (
A
) as shown
below.
R
Starting from the camera module, attach each
module in order from the top. (
B
-1—
B
-5)
R
Insert the holders (
1
) into the slots (
2
) on the
both sides of the frame.
R
The combination of modules changes according
to the number of rooms connected to.
B
- 1
B
- 2
B
- 3
B
- 4
B
- 5
A
B
2
1
2
Hold down the left and right side plates (
C
), secure
them using the screws (
D
). Make sure that each
module is securely attached.
R
The included number of screws differs according
to the back box type (large or small) connected
to.
C
C
D
D
4.3.3 Connecting flat cables
1
Remove each terminal cover (
A
) from each module
(
A
-1).
R
Remove the terminal cover of the attached
module.
2
Connect the flat cable (
B
) from the camera module
to the module of the next button.
R
Starting from the camera module, attach each
module in order from the top.
3
Connect the flat cables (
B
) to all of the remaining
modules.
4
After connections are completed, reattach each
terminal cover (
A
) to each terminal (
A
-2). Make sure
each module is securely attached.
R
C
: 1 of the included flat cables will not be used
Example: lobby station for camera module
´
1 pcs. +
button module
´
3 pcs. + blank panel
´
1 pcs.
B
B
B
C
A
A
A
- 1
A
- 2
B
26
4. Installation
