Panasonic VL-V900, Инструкция по установке и эксплуатации

Страница: 44 / 68

Parameter Description and available settings Default
Terminal 1–4 Reception Code Determines whether terminal 1–4 is a reception
terminal or a normal terminal (i.e., cannot be used as a
reception terminal).
[0]: NORMAL TERMINAL
[1]: RECEPTION TERMINAL 0
(NORMAL
TERMINAL)
Emergency Terminal Extension
Number Tells the system the extension number for the
emergency terminal.
(24 digits max.) —
Emergency Terminal Emergency
Mode Determines whether the emergency terminal can talk
to residents during an emergency call (emergency talk
mode) or if the emergency terminal receives an
announcement only (emergency notice mode).
[0]: EMERGENCY TALK
[1]: EMERGENCY NOTICE 0
(EMERGENCY
TALK)
Lobby Station 1–3 — Room settings
Parameter Description and available settings Default
Room No. Determines the room number.
(1–99999; 0 is displayed when the room is not
configured) —
Resident Name Determines the resident name for the corresponding
room number.
(20 characters max., uppercase letters only) —
Lobby Station 1–3 — General settings
Parameter Description and available settings Default
Door Key Open Time Determines the amount of time the door stays open. If
set to 0 SEC, the door cannot be opened.
(1–20 SEC, or 0 to disable) 5 SEC
Door Key Out Signal Determines whether the signal sent to the electric lock
is a closed signal (i.e., the signal is normally open) or
an open signal (i.e., the signal is normally closed).
[0]: CLOSE
[1]: OPEN 0
(CLOSE)
Door Key Open Code Determines the door open code. If disabled, the door
cannot be opened using a code.
(4 digits, or #### to disable) ####
(DISABLE)
Door Key External In Tells the system whether an access controller (door
opener, key switch, card reader, etc.) is connected to
the lobby station and used to unlock the door.
[0]: NO
[1]: YES 0
(NO)
Door Key In Signal Determines whether the signal received from the
access controller is a closed signal (i.e., the signal is
normally open) or an open signal (i.e., the signal is
normally closed).
[0]: CLOSE
[1]: OPEN 0
(CLOSE)
Camera Connection Tells the system whether a camera is connected or not.
[0]: NO
[1]: YES 0
(NO)
44
5. Programming