manualshive.com logo in svg

Panasonic VL-V700, Инструкция по установке и эксплуатации

Поделиться
Скачать
Panasonic VL-V700 Скачать руководство пользователя страница 64

5

Enter a feature number to specify the terminal’s operation mode.

Feature number

Description

00#

 (default)

For the emergency terminal

Selects EMERGENCY TALK mode. During an emergency call,
the main monitor can talk to the emergency terminal (up to 10
minutes).

For terminals 1–4

Selects NORMAL TERMINAL mode. The terminal cannot be
used as a reception terminal.

01#

For the emergency terminal

Selects EMERGENCY NOTICE mode. During an emergency
call, the emergency terminal receives a repeating emergency
announcement.

For terminals 1–4

Selects RECEPTION TERMINAL mode. The terminal can be
used as a reception terminal.

R

Refer to 6.3  Facility staff operations (Page 83) and switch
the visitor call mode to reception mode.

For systems that support enhanced features version 2 or later (page 92)

Gate call settings can be configured for each lobby station and camera connected to each control box.

Feature number

Description

02#

: GATE CALL (LOBBY GROUP 1)

03#

: GATE CALL (LOBBY GROUP 2)

04#

: GATE CALL (LOBBY GROUP 3)

Gate call settings (page 74):
The lobby number of the reception room and the reception
terminal used in the reception must be linked together in advance.
When the number of extension boxes used is increased, the DIP
switches of the extension boxes must be configured.

6

Hang up.

Note:

R

A compatible main monitor, such as the VL-MVN511, is required to make emergency calls to the emergency
terminal.

Deleting a terminal assignment

Use this procedure to stop using a terminal with the system.

1.

Dial the extension number assigned to the control box.

2.

Enter a feature number to specify which terminal will be deleted.

Feature number

Description

##*0#

 

#

Emergency terminal

##*1#

 

#

Terminal 1

##*2#

 

#

Terminal 2

##*3#

 

#

Terminal 3

##*4#

 

#

Terminal 4

3.

Hang up.

5.5 Main monitor programming

Use this procedures in this section to configure the following settings. Perform this procedure for each main monitor.
– Set the main monitor to apartment mode
– Set the room number

64

5. Programming

Содержание VL-V700

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды