9
Introduction and Installation
3
Remove the adjustment cover, and then adjust the angle of the camera lens.
* Be sure to install the adjustment cover after adjusting the angle of the camera lens.
Screwdriver
Left direction
(maximum 16
°
)
Angle adjustment lever
Right direction
(maximum 16
°
)
Upward direction
(maximum 16
°
)
Adjustment
cover
Standard installation height and filming range
Adjust the angle of the camera lens when carrying out installation.
•
Vertical direction (facing the front)
(16
°
to the right)
(16
°
upward)
•
Horizontal direction (facing the front)
•
The angle can also be adjusted
16
°
to the left.
Note:
•
The measurements and angles are for reference purposes and may vary depending
on the environment.
•
If a strong light is against the door station, the visitor’s face may not be
distinguishable. Do not place the door station in the following locations.
– Where most of the background is the sky.
– Where the background is a white wall, and direct sunlight will reflect off it.
– Where direct sunlight will shine on the door station.
– Depending on where this unit is installed, surrounding noises will cause howling
(beeping sound) to occur. Please avoid installing the unit in such a place.
•
Make sure the back of the door station is not subject to water.
Wire type and distance
•
Wire (between the monitor station and the door station):
Type: General cable CAT-3 24 AWG.
Distance: Maximum 100 m (about 328 feet).
