Panasonic VL-CM851A, Руководство по эксплуатации

Страница: 27 / 52

Programming function settings
You can change the function settings to suit your needs.
How to change the function settings
1
Press M MENU N , then select the “
ALL SETTINGS
” by pressing MDN , MCN , MFN , or MEN .
2
Press M N (monitor button) ( “
OK
” ), then select the desired item by pressing MDN or MCN .
3
Press M N (monitor button) ( “
OK
” ).
4
Press MDN or MCN to select the desired setting, then press M N (monitor button) ( “
OK
” ).
R This step may vary depending on the feature being programmed.
5
Press MDN or MCN to select the desired setting, then press M N (monitor button) ( “
OK
” ).
6
To finish the operation, press M MENU N 2 times.
Note:
R When no operation is performed for about 60 seconds during settings, the setting function quits.
Function list
In the following list, < > indicates the default settings.
Item Function Setting
START-UP
SETTINGS
MOTTLED COLOR
PREVENT
*1
< POWER FREQUENCY (60Hz) > / POWER FREQUENCY
(50Hz)
R To prevent mottled or uneven color from being
displayed, set the power frequency to match the area in
which you use the unit.
TIME AND DATE
SETTINGS
*1
You can set the current date and time (page 16).
LANGUAGE
SELECTION < ENGLISH > / FRENCH / SPANISH / ARABIC
DISPLAY/SOUND
SETTINGS WIDE/ZOOM
SETTINGS
*1
<
WIDE
> /
ZOOM
R Select how images are initially displayed: Wide or Zoom.
CONTRAST When it is difficult to see the monitor display, you can
adjust the display contrast. 5 levels are available.
OPERATION
GUIDANCE
< YES > / NO
R Select
NO
if you do not want the operation guidance
(page 13, 25) to be displayed when viewing Wireless
Camera images or recorded images.
CONFIRMATION
SOUND <
ON
> /
OFF
R When
OFF
is selected, all sounds (apart from audio
from talking) are turned off.
SAVE CAMERA
BATTERIES
*1
–
< OFF > / ON
R Select
ON
to lengthen the time that the batteries can be
used for. (However, by selecting
ON
, the time it takes to
display images when monitoring may increase.)
27
How to use