Tuning and Editing Channels
53
Set DVB channel manually [Manual Tuning]
Normally use [Auto Setup] or [Update Channel List] to retune DVB channels.
If tuning has not been done completely or for adjusting the direction of the aerial, use this function.
10
[CH21]
474,00 MHz
10
0
0
Searching
DVB Manual Tuning
Frequency
Signal Quality
Signal Strength
No.
Channel Name
Type
New
Free TV: 0
Pay TV: 0
Radio: 0
Data: 0
select
frequency
search
1
Adjust frequency for each channel
2
Search
select channel
adjust frequency
●
Set where the level of [Signal Quality]
becomes the maximum.
●
All channels found will be added to the Channel List.
Set Analogue channel manually [Manual Tuning]
[Fine Tuning]:
Use to make small adjustments to the tuning of an individual programme (affected by weather
conditions, etc.).
[Manual Tuning]:
Set Analogue channel manually after Auto Setup.
●
If a VCR is connected only with the RF cable, select channel position [0].
Example:
CH33
1 BBC1
Store
CH 1
99
41
H: 21
Analogue Manual Tuning
Manual Tuning
Fine Tuning
1
Select the channel position
2
Select the channel
3
Search
4
Select [Store]
select
store
Update DVB channel automatically [Update Channel List]
You can add new channels, delete removed channels, update channel name and position automatically to the channel
list.
Example:
CH 21
68
DVB Update Channel List
Progress
This will take about 3 minutes.
CH
Channel Name
Type
Quality
●
The channel list is updated while keeping your settings in [Favourites Edit],
[Channel List], [Child Lock], etc.
●
Depending on the signal condition, the update may not work properly.
Display a notification message [New Channel Message] (DVB)
Selects whether to give a notification message when a new DVB channel is found.
New channels found!
Press OK to update channel list.
Press EXIT to ignore.
●
Selecting OK will perform [Update Channel List].
Check DVB signal [Signal Condition]
Selects a channel and checks the DVB signal condition.
A good Signal Strength is not an indication of suitable signal for DVB reception.
Use the Signal Quality indicator as follows.
●
Green bar: Good
●
Yellow bar: Poor
●
Red bar: Bad (Check the Terrestrial aerial)
●
To change the channel
Example:
70 CBBC Channel
0
0
9
8
0.00E+00
Wenvoe
802,00 MHz [CH62]
DVB Signal Condition
Signal Quality
Channel Name
Signal Strength
Bit Error Rate
Network Name
Frequency
9
8
These bars show the maximum signal value of the selected
channel.
