Panasonic Viera TH-P50ST30A, Руководство по обслуживанию, Страница: 26 / 132

26
9.17. Remove the Contact metal bot-
tom B
1. Remove the Stand bracket. (See section 9.15.)
2. Remove the screws (
×
7 ,
×
7 ,
×
1 ).
3. Remove the Contact metal bottom B.
9.18. Remove the Plasma panel sec-
tion from the Cabinet assy
1. Place the Cabinet assy on a flat surface of a table (cov-
ered by a soft cloth) and a cushion.
2. Remove the Contact metal bottom B. (See section 9.17.)
3. Remove the screws (
×
6 ).
4. Remove the Plasma panel section from the Cabinet assy.
9.19. Remove the Contact metals
and the Bottom support metal
1. Remove the Cabinet assy. (See section 9.18.)
2. Remove the Tape from the Contact metals.
3. Remove the screws (
×
11 ).
4. Remove the Contact metal side (L, R).
5. Remove the screws (
×
6 ).
6. Remove the Contact metal top.
7. Remove the screws (
×
15 ).
8. Remove the Bottom support metal and the Contact metal
bottom A.
9.20. Remove the C1-Board
1. Remove the Bottom support metal and the Contact metal
bottom A. (See section 9.19.)
2. Disconnect the flexible cables (CB1, CB2 and CB3).
3. Disconnect the flexible cable (C10).
4. Disconnect the connector (C14).
5. Remove the screws (
×
3 ) and remove the C1-Board.