Panasonic Viera TH-42PD60, Руководство по эксплуатации, Страница: 8 / 48

8
Y
PB
PR
Y
PB
PR
COMPONENT VIDEO
INPUT
INPUT 1 INPUT 2 OUTPUT
S VIDEO
1 2
L
R
VIDEO
AUDIO IN
D I G I T A L
A U D I O
O U T
S E R V I C E
O N L Y
A N T
2
Setting-up
3
Stopping the plasma television from falling over
* Carry out work on a horizontal and level surface.
Lift the television unit above the pedestal base,
with the back of the television unit on the same
side as the Label. Then align the holes in the
television unit with the poles of the pedestal
and lower the television unit into place. Use the
assembly screws
B
(M5 x 30) to fasten securely.
Accessories/Options
■
Securing to a base
■
Securing to a wall
* Remove the screws
at both top corners on
the rear side of the
plasma TV, and attach
the clamps
to the
plasma TV using the
removed screws.
* Use strong wire
or chain which is
commercially available
to secure the plasma
television to a solid
area of the wall or a
pillar.
Remove the plasma television unit from its packing box, spread a clean blanket or other covering on a level
floor or stand, place the television on the floor or stand with its front panel facing down, and keep it like this
until installing it on the pedestal.
Securing the television unit
* The plasma TV must be fastened to both the base and the wall.
Label
Pedestal
Television unit
Rear
Front
Front
Wood
Worktop
Fasten with wood screws in the holes
in the back edge of the wood worktop.
If there are no holes, first drill them in
the middle of the thickness of the wood
worktop, and then fasten the strap with
wood screws.
Securing method
Screws on main body
Do not remove this screw.
1 Band (2) 2 Screw (2) 3 Wood screw (2) 4 Clamp (2)
Accessories for pedestal security
M4 x 10
* The plasma TV must be fastened to both the base and the wall.