Panasonic Vericam 35, Руководство по эксплуатации

Страница: 64 / 119

– 64 –
Chapter 7 Viewfinder — Convenient shooting functions
f
In the expanded display, the status display and zebra pattern disappear.
f
You can set the display mode in [MENU] → [VF SDI SETTINGS] → [ASSIST] → [EXPAND POS]/[EXPAND VALUE]/[EXPAND MODE].
@ @
NOTE
t
The output video from the viewfinder screen and <VF SDI> terminal are enlarged.
t
Images output from the <SDI OUT1>/<SDI OUT2>/<SDI OUT3>/<SDI OUT4> terminals and the <MON OUT1> terminal are not expanded.
t
When [VF] is selected in [MENU] → [SYSTEM SETTINGS] → [MON OUT] → [MON OUT2 SIGNAL SEL], output from the <MON OUT2> terminal is
the same with the output from the <VF SDI> terminal.
Advanced assist function
Peaking display (focus in red)
Set [MENU] → [VF SDI SETTINGS] → [ASSIST] → [ADVANCED ASSIST SW] to [ON].
Set [MENU] → [VF SDI SETTINGS] → [ASSIST] → [PEAKING SW] to [ON].
Set [MENU] → [VF SDI SETTINGS] → [ASSIST] → [COLOR] to [RED].
Adjust the focus so that the contours of the subject you want to focus on turn red.
In [MENU]
→ [VF SDI SETTINGS] → [ASSIST] → [COLOR], [GREEN] or [WHITE] can be selected.
@ @ NOTE
t
Only the output video from the viewfinder screen and <VF SDI> terminal are displayed.
Focus square display
Set [MENU] → [VF SDI SETTINGS] → [ASSIST] → [ADVANCED ASSIST SW] to [ON].
Set [MENU] → [VF SDI SETTINGS] → [ASSIST] → [FOCUS SQUARES SW] to [ON].
Adjust the focus so that the square size displayed in the area of the subject to be focused becomes the largest.
When focused on the doll When focused on the panel
@ @ NOTE
t
Only the output video from the viewfinder screen and <VF SDI> terminal are displayed.
Focus bar display
The focus bar can be displayed when [ON] is set in [MENU] → [VF SDI SETTINGS] → [ASSIST] → [FOCUS BAR SW].
The degree of focus is indicated by the length of the bar.
f
White bar: Focus bar display
f
Green line: Peak display
Not in focus The bar extends to the right when the viewfinder is
in-focus.
@ @ NOTE
t
Only the output video from the viewfinder screen and <VF SDI> terminal are displayed.