Panasonic VARICAM LT, Руководство по эксплуатации

Страница: 93 / 182

– 93 –
Chapter 8 Output and Screen Display — Screen status display
Screen status display
Status display (STATUS)
This is the status screen displayed in the <SDI OUT 1>, <SDI OUT 2>, and <VF SDI> output, and the control panel (VIEW screen).
ALT
4096 x 2160 I-4K422/G6
AWB ACTIVE
M 999min TC 12:59:59:23 13.5V
23.98fps
A001C003_150622
180.0deg ISO12800 10.0 99.9ft 1000.0mm ND:1.8 VFR
EX
GPS
+7STOP
T11.0A
S 999min 12.8V G6
TURN POWER OFF!
E-
A001C003
M S
1
16 18 19 17
2 4 3 5 6 7 8 10 12
14 15
9 11
21 22 24 20 13 23 25
26
27
28
29
1 System pixel
2 Main slot card recording status
3 Main slot card remaining capacity and card status
4 Main codec
5 Proxy codec (main card)
6 Sub slot card recording status
7 Sub slot card remaining capacity and card status
8 Proxy codec (sub card)
9 Voltage value of the power supply connected to the <DC IN> terminal
10 Remaining capacity of the battery connected to the battery holder, or voltage value of the power supply (by the battery)
11 Time code/user bits/duration (only when recording)
12 Warning/alert
13 User clip name ([TYPE3] only)
14 Clip name
15 FPS
16 Shutter
17 EXPOSURE INDEX
18 White balance
19 Iris
20 Focus position
21 Zoom
22
ND filter
23 VFR setting
24 GPS status
25 Extender
26 AWB/ABB status
27 System error (<VF SDI> terminal and control panel (VIEW screen) only)
28 Error number (<VF SDI> terminal and control panel (VIEW screen) only)
29 Y GET
f
Status display item for the <SDI OUT 1>/<SDI OUT 2> terminal is selected in [MENU] → [OUTPUT SETTINGS] → [SDI OUT INDICATOR].
f
Display/hide of the status display to the <SDI OUT 1> terminal is switched in [MENU] → [OUTPUT SETTINGS] → [SDI OUT INDICATOR] → [SDI
OUT 1 SW].
f
Display/hide of the status display to the <SDI OUT 2> terminal is switched in [MENU] → [OUTPUT SETTINGS] → [SDI OUT INDICATOR] → [SDI
OUT 2 SW].
f
Status display item for the <VF SDI> terminal and the control panel is selected in [MENU] → [OUTPUT SETTINGS] → [VF SDI INDICATOR].
f
Display/hide of the status display to the <VF SDI> terminal and the control panel is switched in [MENU] → [OUTPUT SETTINGS] → [VF SDI
INDICATOR] → [VF SDI SW].