Panasonic UltraHD DP-UB450, Руководство по эксплуатации

Страница: 23 / 38

- 23 -
Reference
Setup menu
Change the unit’s settings if necessary. The
settings remain intact even if you switch the unit
to standby.
1
Press [HOME].
2
Select “Setup”.
3
Select “Player Settings”.
UB450
OK
RETURN
Player Settings
System
Ratings
Network
Language
3D
Sound
Picture
Video Format Automatic
4K(50p/60p) Output Off
24p Output Automatic
HDMI(VIDEO) Output Mode Automatic
Dolby Vision Setting Off
HDR10+ Setting On
Advanced Settings
4
Select an item and change the settings.
To exit the screen
Press [HOME].
Picture
„
Video Format
The items supported by the connected devices
are indicated on the screen as “ ∗ ”. When any
item without “
∗
” is selected, the images may be
distorted.
y
If “Automatic”
*
1
is selected, the best suited
output resolution to the connected TV is
automatically selected.
„
4K(50p/60p) Output
This unit automatically chooses to output images
in 4K
*
2
(50p/60p) when connected to a 4K (50p or
60p) compatible TV.
y
This item is available only when “Video Format”
is set to “Automatic” and “4K”.
y
To connect to a TV that supports 4K (50p/60p)
4:4:4/8 bit or 4K (50p/60p) 4:2:2/12 bit, select
“4K(50p/60p) 4:4:4”.
Images will not be output correctly with an HDMI
cable that does not support 18 Gbps.
y
To connect to a TV that supports 4K (50p/60p)
4:2:0/8 bit, select “4K(50p/60p) 4:2:0”.
„
24p Output
Content recorded at 24p
* 3
, such as BD-Video
films, is output at 24p when played back.
y
When this unit is connected to TV compatible
with 4K/24p and “Video Format” is set to
“Automatic” or “4K”, images will be output in
4K/24p.
y
When this unit is connected to a TV compatible
with 1080/24p and “Video Format” is set to
“Automatic”, “1080i” or “1080p”, images will be
output in 1080/24p.
y
If images output in 24p are distorted, change
the setting to “Off”.
UB450
„
HDMI(VIDEO) Output Mode
Set whether or not to output audio from the HDMI
VIDEO OUT terminal.
y
When an amplifier is connected to the HDMI
AUDIO OUT terminal and this menu item is set
to “Automatic ( Video Only / Video+Audio )”, the
TV may not output audio. In that case, select
“Video+Audio”.
UB450
„
Dolby Vision Setting
You can set enable/disable of the Dolby Vision
function.
By changing this setting to “On”, you can use
the Dolby Vision function under the following
conditions:
– A device (TV, etc.) that supports Dolby Vision is
connected (

10).
– A disc that supports Dolby Vision is played back.
y
The “Picture Settings” setting is disabled while
using the Dolby Vision function. (  22)
y
If all the conditions below are met, both Dolby
Vision and HDR10+ are enabled. In that case,
playback in HDR10+ format takes precedence.
– The playback media or content is recorded in
both Dolby Vision and HDR10+ formats.
– Both Dolby Vision and HDR10+ are supported
by the connected device (TV, etc.).
– Both this function and “HDR10+ Setting” are
set to “On”.
Reference