manualshive.com logo in svg

Panasonic UF-6300, Руководство по обслуживанию, Страница: 96 / 274

Поделиться
Скачать
Panasonic UF-6300 Скачать руководство пользователя страница 96

96

4.4.2.

Blank Copy

START

END

Check the Scanner mechanism.

Are there any foreign particles 
or stains on the BTR?

Is the Toner Cartridge
operational?

Is the Power Supply Unit 
normal?

Yes

Yes

Yes

No

No

No

Replace the Toner Cartridge .

Yes

No

1. Clean the BTR with a soft, 
     dry cloth.

2. Replace the BTR. 

1. Check all connectors and
     voltages on the Power Supply  
     Unit.
2. Check the Connector and 
     voltage on the Power 
     Supply Unit.
3. Replace the Power Supply Unit.

Are there any foreign particles 
or stains blocking the Laser 
Beam path?

Yes

No

Is the SC PCB normal?

1. Remove the particles from the 
     laser beam path or clean the stains.
2. Replace the Laser Unit (LSU).

1. Check all connectors and 

voltages on the SC PCB.

2. Replace the SC PCB.

Yes

No

Paper Travel

Is the printout in  Service 
Mode 3 normal?

Содержание UF-6300



















































































































































































































































































Отзывы:

Нет отзывов