background image

Troubleshooting

33

Help

The following table describes the meaning of each error code which may appear on the display.

Error Codes

Error Code

Cause

Remedy

See 

Page

U103021
~ U103025
U403021
~ U403025

The scanner or screen is in strong 
sunlight or strong lighting.

Change the location of the unit or block 
the light.

U403011
U403012

The screen will not move.

Turn off the power and slowly move the 
screen by hand.

U308002

There is no paper in the printer.

Add paper to the printer.
Depending on the printer, it may be 
necessary to press the error 
cancellation button (ex. OK) on the 
printer after fixing the printer error. 
Refer to the manual of the printer for 
details.

U308003
U308004

There is a printer error.

Fix the printer error according to the 
printer manual.

U308001

Unsupported printer is connected.

Connect compatible printer.

37

U408001

The USB cable connecting the printer 
and the unit was removed while 
copying.

Connect the USB cable for printer 
securely, then copy required number of 
sheets again.

U307010

There is no available space in the USB 
flash memory device.

Increase the available space using a 
computer.

U306010

There is no available space in the SD 
memory card.

Increase the available space using a 
computer.

U307035

Write-protection is set on the USB flash 
memory device.

Cancel the write-protection.

U306035

Write-protection is set on the SD 
memory card.

Cancel the write-protection.

U407010

The available space in the USB flash 
memory device became full while 
scanning.

Increase the available space using a 
computer, then scan again.

U406010

The available space in the SD memory 
card became full while scanning.

Increase the available space using a 
computer, then scan again.

UB5838C-PJQXC0259ZA_mst.book  33 ページ  2009年5月26日 火曜日 午後2時59分

Содержание UB-5338C

























































Отзывы: