- 49 -
■
Signal Supported Recording (Timer Programming from the
TV Guide signal)
Signal Supported Recording
is
Timer Programming
which is controlled by
information from the TV Guide; if programme start and end times are changed
by the broadcaster, the timer programming event will follow the change. Note
that
Signal Supported Recording
only works reliably if correct information is
received from broadcasters.
●
The availability of this function depends on the country and TV mode you
select.
●
is displayed on the
Timer Programming
screen if
Signal Supported
Recording
is set.
= Note =
●
If you edit the start time or end time of a signal supported recording event
by more than 10 minutes, it will no longer follow the broadcaster’s changes
to the start or end time. The start and end times will become fixed.
Teletext
Viewing Teletext
1. Switch to teletext with
TEXT
●
Displays the index page (content varies depending on the
broadcasters).
●
Current / sub page numbers are displayed on the top left of the screen.
●
Time / date is displayed on the top right of the screen.
●
Colour bar is displayed on the bottom of the screen.
2. Select the page with numeric buttons, / or
(Coloured buttons)
●
To adjust contrast
1) Press
MENU
three times to display
Contrast
2) Adjust with / and press
OK
to set
●
To exit teletext
EXIT
Содержание TXL42DT60Y
Страница 1: ...eHELP English TX L42DT60Y TX L47DT60Y TX L50DT60Y TX L55DT60Y TX L60DT60Y ...
Страница 214: ...Ver 1 01 ...