Panasonic TX-PR42UT30, Руководство по обслуживанию

Страница: 23 / 114

23
8.10. Remove the Stand bracket and
the Hanger metals
1. Remove the Plasma panel section from the servicing
stand and lay on a flat surface such as a table (covered
by a soft cloth) with the Plasma panel surface facing
downward.
2. Unlock the cable clampers to free the cable.
3. Remove the AC inlet. (See section 8.2.)
4. Remove the Stand bracket fastening screws (
×
5 ) and
remove the Stand bracket.
5. Remove the Hanger metals (L, R) fastening screws (
×
2
each) and remove the Hanger metals (L, R).
8.11. Remove the Plasma panel sec-
tion from the Cabinet assy
1. Remove the Plasma panel fastening screws (
×
4 ) and
remove the Cabinet assy.
2. For leaving the Cabinet assy from the Plasma panel, pull
the bottom of the Cabinet assy forward, lift, and remove.
8.12. Remove the Radiator plate
1. Remove the Stand bracket and the Hanger metals. (See
section 8.10.)
2. Remove the screws (
×
15 ) and remove the Radiator
plate.