- 49 -
(DVB-C)
●
Scan Mode
Full
:
Scans the whole frequency range.
Quick
:
Scans the suitable frequency in your country.
●
Normally set
Frequency
,
Symbol Rate
and
Network ID
to
Auto
. If
Auto
is not displayed or if necessary, enter each value specified by your
cable provider with numeric buttons.
●
After settings, select
Start scan
with / and press
OK
to search.
3. The confirmation screen is displayed and press
OK
to start
Auto Setup
(Settings are made automatically)
●
When the operation is completed, the channel at the lowest position will
be displayed.
■
Auto Setup using the buttons on the TV
1. Press and hold INPUT/OK/HOLD for MENU button for 3 seconds to
display the menu
2. Set
Auto Setup
with following control panel buttons
●
Move the cursor / select from a range of options / select the menu item
(up and down only)
●
Access the menu / store settings after adjustments have been made or
options have been set with INPUT/OK/HOLD for MENU button.
Manual Tuning
●
Normally use
Auto Setup
or
Update Channel List
to retune DVB channels.
●
If tuning has not been done completely or for adjusting the direction of the
aerial, use this function. (DVB)
●
All DVB channels found will be added to
Channel List
.
■
DVB-C
1. Enter the frequency with numeric buttons
Содержание TX-L42ET60E
Страница 1: ...eHELP English TX L42ET60E TX L47ET60E TX L50ET60E TX L55ET60E ...
Страница 156: ...Ver 2 01 ...
