On screen messages
75
Message
Meaning / Action
New channels found!
Press OK to update
channel list.
Press EXIT to ignore.
There may be new channels available.
This message will appear each time a change is made by the
broadcasters. This message can be deactivated by setting [New
Channel Message] to Off in [DVB Tuning Menu].
Selecting OK will perform [Update Channel List].
No channel found.
Please check aerial or
local signal availability.
Press OK to start Auto
Setup.
Follow the on screen instructions.
Please also refer to p. 72.
If channels are still not found, consult your local Panasonic dealer.
No module inserted
Check the CI module is inserted completely (p. 49).
No recording -
Already recording
The equipment may already be recording.
No recording -
Check media
The tape or disc may be “write protected”, full, missing or damaged.
No recording - Playing
The equipment may be playing the tape or disc.
No recording - Unknown
reason
The recording may not be performed. Check the equipment.
No service
The broadcaster has stopped the service. Check the channel in the
TV Guide. (p. 18)
No signal
The TV cannot detect the signal. Check the connection of the RF cable.
PIN incorrect!
The PIN number you entered is wrong.
Please check settings and
connections
on HDMI devices.
Communication error in VIERA Link function (p. 61).
Please wait.
A function is in progress.
Recording this channel
now
The recorder is recording the programme from its own tuner. You can
turn the TV off and leave the equipment recording in the normal way.
Reset to Factory Shipping
Condition Completed.
Please switch off TV.
[Auto Setup] will automatically start when Mains power On / Off
switch is next turned On. (p. 12)
Sending Preset Data
Q-Link or VIERA Link channel download is in progress.
Software successfully
updated.
Press EXIT to continue.
The software updating is finished.
Software update failed.
Please try again later.
Press EXIT to continue.
Perform [System Update Search Now] in System Update (p. 50).
If this is still unsuccessful, there may not be any new software
available.
This timer will not follow
the TV Guide information.
Press OK to continue,
RETURN to restore original
timer.
If you edit the start time or end time of Guide link programming by
more than 10 minutes, it will no longer be performed as Guide link
programming. The programming will be performed according to the
time setting.
Timer already expired !
The starting time in Timer Programming has already passed.
Set the timer correctly (p. 42).
Timer Event Due to Start
:
has been
programmed for External
recording at
:
This message will appear 2 minutes before timer programming event
for external recording due to start.
Timer incorrect !
Set the start and end times in Timer Programming correctly (p. 42).
Timer overlap.
Press OK to keep,
RETURN to edit.
Timer programming events are overlapped. Press the OK button
to keep the overlapped setting. [Ext Rec.] is given priority over
[Reminder]. When two or more [Ext Rec.] overlap, the first timer
programming event starts and finishes as programmed. The next
timer programming event can then start.
Tuner Locked
Press EXIT to unlock and
stop recording
If you want to unlock the tuner, cancel Direct TV Recording (p. 60, 62)
or the recording of Timer Programming (p. 42).
Unable to download,
please check equipment
The tape or disc is active. Stop the equipment and try again.