30
Retuning from Setup Menu
Advanced Features
Retuning from Setup Menu
Automatically retune the channels received in the area.
●
This function is available if channel tuning is already performed.
●
Only the selected mode is retuned. All the previous tuning settings are erased.
●
If [Child Lock] PIN number (p. 35) has been set, the PIN number is required.
●
If tuning has not been done completely
[Analogue Manual Tuning]
1
Select the mode
TV
2
Display the menu and select [Setup]
Main Menu
Picture
Sound
Setup
OK
select
access
MENU
3
Select [Tuning Menu]
Setup Menu
Tuning Menu
Access
OK
select
access
4
Set [TV Selection] to the signal you want to tune
Tuning Menu
TV Selection
Antenna
OK
select
set
5
Select [Automatic Channel Search]
Tuning Menu
Automatic Channel Search
Access
OK
select
access
6
Select the provider (Cable only)
7
Set the settings for [Automatic Channel Search] (Cable only) and
start tuning
Automatic Channel Search
Scan
Frequency (KHz)
Network ID
Scan
0%
Advance
Auto
306000
Scan Mode
jkl
tuv
abc
mno
wxyz
def
ghi
pqrs
OK
select
set
access
●
The function items vary depending on the country and
●
[Scan Mode]
[Full]:
Scans the whole frequency range. Settings are made automatically. [Frequency] and [Network ID]
are not available.
[Quick]:
Scans according to the settings you made in [Network ID].
[Advance]:
Scans according to the settings you made in [Frequency] and [Network ID].
●
Normally set [
Frequency
] and [Network ID] to [Auto].
If [Auto]
is not displayed or if necessary, enter the value specified by your cable provider with numeric
buttons.
●
After settings, select [Scan].
Downloaded from www.vandenborre.be