Panasonic TX-29E50D, Руководство по обслуживанию

Страница: 1 / 23

TX-29E50D
TX-29E50D/B
TX-29PS12D
TX-29PS12F
TX-29PS12P
CP-830FP Chassis
SPECIFICATIONS
Power Source: 220-240V a.c.,50Hz
Power Consumption: 100W
Stand-by Power
Consumption:
1,5W
Aerial Impedance: 75Ω unbalanced, Coaxial Type
Receiving System: PAL-I, B/G, D/K, PAL-525/60
SECAM B/G, D/K, L,L’
M.NTSC (AV only)
NTSC (AV only)
Receiving Channels:
VHF E2-E12 VHF H1-H2(ITALY)
VHF A-H (ITALY) VHF R1-R2
VHF R3-R5 VHF R6-R12
UHF E21-E69 CATV (S01-S05)
CATV S1-S10 (M1-M10) CATV S11-S20 (U1-U10)
CATV S21-S41 (HYPERBAND)
Intermediate Frequency:
Video/Audio
Video 38,9MHz,
33,9Mhz
Sound 33,4MHz (B/G), 33,16MHz (A2)
33,05MHz (NICAM B/G,D/K,L)
32,4MHz (D/K), 32,66MHz (CZ STEREO)
40,4MHz (L’), 39,75MHz (L’NICAM)
Colour 34,47MHz (PAL)
34,5MHz, 34,65MHz (SECAM)
38,3MHz, 38,15MHz (SECAM L’)
Terminals:
AV1 IN Video (21pin) 1V p-p 75Ω
Audio(21pin) 500mV rms 10kΩ
RGB (21pin) 0,7V p-p 75Ω
AV1 OUT Video (21pin) 1V p-p 75Ω
Audio (21pin) 500mV rms 1kΩ
AV2 IN Video (21pin) 1V p-p 75Ω
Audio(21pin) 500mV rms 10kΩ
S-Video IN Y: 1V p-p 75Ω
(21pin) C: 0,3V p-p 75Ω
AV2 OUT Video (21pin) 1V p-p 75Ω
Audio (21pin) 500mV rms 1kΩ
AV3 FRONT Audio (RCAx2) 500mV rms 10kΩ
Video (RCAx1) 1V p-p 75Ω
S-Video IN Y: 1V p-p 75Ω
C: 0,3V p-p 75Ω
High Voltage: 29kV ± 1kV
Picture Tube: A68ERF182X44 68cm
Audio Output: 2x7W RMS, 2x14W MPO,
8Ω impedance
Headphones: 8Ω impedance
Accesories
supplied:
Remote Control
2xR6 (UM3) Batteries
Dimensions:
Height: 585 mm
Width: 776 mm
Depth: 533 mm
Net weight: 44,0 kg
Specifications are subject to change without notice.
Weights and dimensions shown are approximate.
Order No: PCZ0510103C2