74
Setup Utility
You can make the settings of the computer’s operating environment (password settings, startup drive selection, etc.)
z
Cannot display the Setup Utility screen in simultaneous display.
1
Turn on or restart the computer.
2
Press
F2
several times while [Panasonic] boot screen is displayed soon after the com-
puter starts the startup procedure.
When [Enter Password] is displayed, enter your password.
When you enter Supervisor Password
z
You can make the settings of all items of the Setup Utility.
When you enter User Password
z
Note the following:
• In the [Advanced] and [Boot] menus, you cannot make the settings of all items.
• In the [Security] menu, you can only change the User Password and TPM. You can change User Password
when [User Password Protection] is set to [No Protection]. You can change TPM when [Embedded Security
(TPM) Sub-Menu] is set to [No Protection].
• In the [Exit] menu, you cannot make the setting of [Get Default Values].
•
F9
does not function.
Starting the Setup Utility
Information Menu
(Underlined items are the factory presets.)
Language
English
Japanese
Model No.
Serial No.
CPU Type
CPU Speed
BIOS
Embedded Controller
System Memory
Primary Master
Optical Drive
Accumulative Operating Time
Computer Informa-
tion (Cannot be
changed.)
