Panasonic Toughbook CF-31GT2AX2M страница 114 Скачать руководство пользователя | Manualshive

Страница: 114 / 126

background image

114

Troubleshooting (Advanced)

A peripheral device does not work.

Install the driver.
Contact the manufacturer of the device.
When operation resumes from sleep

or hibernation, devices such as a

mouse, modem and cards may not function properly. In this case, restart the
computer or reinitialize the device.
When is displayed in the Device Manager, remove and insert the device. If
the problem persists, restart the computer.
When you set [USB Port] to [Disabled] in the [Advanced] menu of the Setup
Utility (

), USB ports of port replicator are also disabled.

The computer may not recognize the connection/removal of some devices, or
may not operate normally with some devices.

A

Click

(Start) - [Computer] - [System properties] - [Device Manager].

A standard user needs to enter an administrator password.

Click [start] - [Control Panel] - [Performance and Maintenance] - [System] -
[Hardware] - [Device Manager].

B

Select the applied device, and remove the check mark for [Allow the
computer to turn off this device to save power] in [Power Management].
(This item may be unavailable for some types of devices.)

In the case that a USB device does not work, remove the USB device and con-
nect it again or connect the USB device to another port.

The connected mouse does not work.

Check the mouse connection.
Install the driver compatible with the connected mouse.
If the mouse does not work even after installing the driver, set [Touch Pad] to
[Disabled] in the [Main] menu of the Setup Utility (

).

USB floppy disk drive does not work
as a boot drive.

You can use only the Panasonic CF-VFDU03U USB floppy disk drive (optional).
Connect the floppy disk drive directly to a USB port of the computer. Do not
connect it via a USB hub or USB connector of the port replicator or the car
mounter. If you have connected to a USB port on the computer, try connecting it
to one of the other USB ports.
Set [USB Port] and [Legacy USB Support] to [Enabled] in the [Advanced] menu
of the Setup Utility (

).

Set [Boot Option #1] to [USB Floppy Disk] in the [Boot] menu of the Setup Utility
(

).

Turn off the computer and connect the USB floppy disk drive, and then restart
the computer.

Connecting Peripherals

«
...
112
113
114
115
116
...
»

Содержание Toughbook CF-31GT2AX2M































































































































Отзывы:

Нет отзывов

Похожие инструкции для Toughbook CF-31GT2AX2M

Бренд: Gateway Страницы: 2

Бренд: IBM Страницы: 2

Бренд: IBM Страницы: 189

Бренд: IBM Страницы: 147

Бренд: Clevo Страницы: 104

Ultra Portable PC

Бренд: Vega Страницы: 23

THINKPAD THINKPAD A30

Бренд: IBM Страницы: 88

Бренд: BenQ Страницы: 32

Бренд: Fujitsu Страницы: 185

A135-S4637 - Satellite - Pentium Dual Core 1.73 GHz

Бренд: Toshiba Страницы: 5

Бренд: Toshiba Страницы: 11

Бренд: ZALMAN Страницы: 4

Бренд: ZALMAN Страницы: 8

Бренд: HCL Страницы: 26

THINKPAD 27R0847

Бренд: IBM Страницы: 2

Бренд: Getac Страницы: 148

Бренд: Ordi Страницы: 76

Бренд: Panasonic Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды