50-inch High Definition Plasma Display
TH-50PH30ER
PMS03/08/2011
1/3
© Panasonic Corporation 2011
Product specification
(design and specification subject to change without notice)
INCLUDED ACCESSORIES
Contrast Ratio
2,000,000 : 1
■DISPLAY
Screen Size (Diagonal)
50-inch (1,268 mm)
Aspect ratio
16:9
Effective Display Area (WｘH )
1,105 x 622 mm
Number of pixels (HｘV)
1,024 x 768 pixels (1 pixel=3cells for R, G and B)
Pixel Pitch (H x V)
1.080 x 0.810 mm
Gradation
5,120 steps (equivalent)
*1: Guideline operating hours before the panel brightness is reduced to half when the panel is used to display motion pictures in the Standard mode.
Afterimages (burned-in images) and malfunctions are not taken into consideration.
Panel Life
*1
approx. 100,000 hours
■CONNECTION TERMINAL
VIDEO IN
BNC x 1
1.0 V[p-p] (75 Ω)
AUDIO IN (L/R)
RCA pin jack x 1 set
0.5 V [rms]
COMPONENT/RGB IN
BNC x 3
Y/G : with sync 1.0 V [p-p] (75 Ω)
B/P
B
/C
B
, R/P
R
/C
R
: 0.7 V [p-p] (75 Ω)
AUDIO IN (L/R)
RCA pin jack x 1 set
0.5 V [rms]
HDMI IN
HDMI TYPE A connector x 1
DVI-D IN
DVI-D 24pin x 1
AUDIO IN
M3 jack x 1
0.5 V [rms]
0.5 V [rms]
PC IN
MINI D-SUB 15pin x1(Female)
Y/G : with sync 1.0 V [p-p] (75 Ω)
Plug & Play (VESA DDC 2B)
B/P
B
/C
B
, R/P
R
/C
R
: 0.7 V [p-p] (75 Ω)
HD/VD : 1.0˜5.0 V [p-p] (high impedance)
AUDIO IN
M3 jack x 1
SERIAL
D-SUB 9pin x 1 (EXTERNAL CONTROL TERMINAL), RS-232C COMPATIBLE
■ELECTRICAL
■CONTROL TERMINAL
Power Requirements
220 - 240 V AC, 50 Hz/60 Hz
230W
195W
0.3W
0.5W
Power Consumption
On Mode Average Power Consumption
*2
Power off condition
Stand-by condition
■SOUND
Audio Output
6Ω,16 W [8 W + 8 W] (10 % THD)
■MECHANICAL
Dimensions (W x H x D)
1,210 x 724 x 89 mm
Carton Dimensions (W x H x D)
1,385 x 836 x 284 mm
Weight
approx. 31.0 kg
Gross weight
approx. 39.0 kg
Cabinet Color
Black
■ENVIRONMENTAL
Operating environment
Temperature:
0 ℃ to 40 ℃
Humidity
:
20 % to 80 % (Non condensation)
Altitude
:
0 to 2,800 m
Storage environment
Temperature:
-20 ℃ to 60 ℃
Humidity
:
20 % to 90 % (Non condensation)
Altitude
:
0 to 3,300 m
■STANDARD (CERTIFICATIONS)
SAFETY REGULATIONS
EN60065, IEC60065, GOST
RADIATION REGULATIONS
EN55022 Class-B, EN55024, EN61000-3-2, EN61000-3-3
■REMOTE CONTROL TRANSMITTER
Power Requirements
DC 3 V (2 x R6 Size batteries)
Operation distance
approx. 7 m in front of plasma display
Weight
approx. 100 g including batteries
- AC power cord - Operating instruction book - CD-ROM (Operating instructions)
- Remote control transmitter - Batteries
*2: Based on IEC 62087 Ed.2 measurement method.
Compliance with DVI Revision 1.0
Compatible with HDCP 1.1
without sync 0.7 V [p-p] (75 Ω)
