background image

Operating Instructions

Basic Guide

UHD LCD Display For business use

Model No.

TH-98SQ1W

98-inch model

TH-86SQ1W

86-inch model

TH-65SQ1W

65-inch model

TH-55SQ1W

55-inch model

TH-49SQ1W

49-inch model

DPQX1407ZA/X1

EU

English

Contents

Important Safety Instructions ····················· 2
FCC STATEMENT ·································· 3
Important Safety Notice ···························· 4
Safety Precautions ·································· 6
Precautions for use ································· 9
Accessories ··········································11
Cautions when moving ··························· 15
Eyebolt   ············································· 16
Connections ········································ 17
Identifying Controls ······························· 21
Basic Controls ······································ 24
Specifications ······································ 26
Software License ·································· 29
PANASONIC PROFESSIONAL DISPLAY 

Limited Warranty ·································· 30
LIMITED WARRANTY STATEMENT ········· 31
Customer Service ································· 32

Read before use

For more information about this product, please read the “Operating 

Instructions – Functional Manual”.
To download the “Operating Instructions – Functional Manual”, please 

visit the Panasonic website (https://panasonic.net/cns/prodisplays/).

 •

Please read these instructions before operating your set and retain 

them for future reference.

 •

Illustrations and screens in this Operating Instructions are images for 

illustration purposes, and may be different from the actual ones.

 •

Descriptive illustrations in this Operating Instructions are created 

mainly based on the 98-inch model.

*Actual resolution:  

3840 × 2160p

TP0819TS0 -PB

Содержание TH-43SQ1W


































Отзывы: