background image

4

Safety Precautions

Always be sure to ask a quali ed technician to carry out set-up.

Small parts can present choking hazard if accidentally swallowed. Keep small parts away from young children. Discard 
unneeded small parts and other objects, including packaging materials and plastic bags/sheets to prevent them from 
being played with by young children, creating the potential risk of suffocation.

Do not place the Display on sloped or unstable surfaces, and ensure that the Display does not hang over the 
edge of the base.

• The Display may fall off or tip over.

Do not place any objects on top of the Display.

• If water is spills onto the Display or foreign objects get inside it, a short-circuit may occur which could result in  re 

or electric shock. If any foreign objects get inside the Display, please consult your local Panasonic dealer.

Transport only in upright position!

• Transporting the unit with its display panel facing upright or downward may cause damage to the internal 

circuitry.

Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table 
cloths and curtains.

For suf cient ventilation;
Leave a space of 10 cm or more at the top, left and right, and 5 cm or more at the rear, and also keep the space 
between the bottom of the display and the  oor surface.

Cautions for Wall Installation

• Wall installation should be performed by an installation professional. Installing the Display incorrectly may lead to 

an accident that results in death or serious injury. Furthermore, when installing on a wall, a wall hanging bracket 
that conforms to VESA standards (VESA 400 × 400) must be used.

• When installing the Display vertically, be sure to install the power switch onto the bottom of the Display.

WARNING 

 Setup

This LCD Display is for use only with the following optional accessories. Use with any other type of optional 
accessories may cause instability which could result in the possibility of injury.

(All of the following accessories are manufactured by Panasonic Corporation.)

• Pedestal .......................................................  TY-STLF20

Содержание TH-42LF25W


















































Отзывы: