1.4 During a Conversation
User Manual
57
To put the third party on hold and talk to the original party
To leave a 3-party conference call
Leaving a Conference Call (Unattended Conference)
To leave a conference call and establish an unattended conference call
•
To return to the held call before the third party joins,
press the corresponding CO or
INTERCOM button or press the Recall/hookswitch.
•
By pressing the CO button corresponding to an outside (CO) line that is not being used by
the conference, a proprietary telephone (PT) user can exit from the conference, leaving
the other 2 parties connected unless they are both on outside (CO) lines. If the other
parties are both on outside (CO) lines, they will be disconnected.
•
You may have to enter the Call Hold feature number after pressing the Recall/hookswitch
on your single line telephone (SLT), depending on the SLT Hold Mode of your PBX. Ask
your manager or dealer about the mode assigned to your PBX.
The PT user who originated a conference with 2 outside parties can leave the
conference and allow the other parties to continue the conversation. Certain
extensions may be restricted from executing this feature through system
programming.
Press
Recall/hookswitch
.
SLT
Talk.
C.Tone
(Optional)
PT/SLT
When you are talking with 2 extensions or
one extension and one outside party
On-hook.
The other 2 parties can continue
their conversation.
PT
When you are talking with 2 outside parties
Press
CONF
.
Содержание TA824
