Other
15
Restore factory settings
This is done when returning the unit to the state of purchase, such as by discarding or transferring the unit.
To restore the factory settings, this unit and the transmitter need to be connected wirelessly.
1
Turn the [VOL] dial in the [
j
] direction until the volume reaches the minimum level [0].
• An operation tone is made when the volume reaches the minimum level [0].
2
Press and hold the [
] and [
] buttons for about 5 seconds or more.
• An operation tone is made and the unit is in the factory settings mode.
• When the unit enters the factory settings mode, the operation indicator (L) and the operation indicator (R) each
blinks (blue) once every second.
3
Press the [
] button while the unit is in the factory settings mode.
• The settings are each initialised, returning to the factory settings.
• The unit turns off.
Note:
• The pairing information for the unit and the transmitter does not get deleted even when the factory settings are
restored. (There is no need to pair the units again.)
Licenses
SOUNDSLAYER is a trademark of Panasonic Holdings Corporation.
PS4 and PS5 are registered trademarks or trademarks of Sony Interactive Entertainment Inc.
Windows is a registered trademark or a trademark of Microsoft Corporation.
Nintendo Switch is a registered trademark or a trademark of Nintendo.
Other names of systems and products mentioned in these instructions are usually the registered trademarks
or trademarks of the manufacturers who developed the system or product concerned.
Some
TM
and
®
marks are not specified in the text.
